Hello!!
I have uploaded the example sketch(link : https://github.com/openenergymonitor/emonTxFirmware/tree/master/emonTxV3/RFM12B/Examples/emonTxV3_continuous_kwhtotals_noeeprom) to the emonTX 3.4.
It seems to get stucked at some point....
Could you help me pleasE? ideas? suggestions?
debug log:
----------------------------------
Sketch ID: emonTxV3_continuous_kwhtotals_noeeprom.ino
ADC mode: free-running
Extra Features: none
powerCal_CT1 = 0.2619
phaseCal_CT1 = 0.22
powerCal_CT2 = 0.2619
phaseCal_CT2 = 0.41
powerCal_CT3 = 0.2619
phaseCal_CT3 = 0.60
powerCal_CT4 = 0.0478
phaseCal_CT4 = 1.25
----
voltage thresholds long:
upper: 64000
lower: -64000
Go!
samples per mains cycle = 57.81
0:0, 0:0, 0:0, 0:0, samples per mains cycle = 38.43
0:0, 0:0, -1:0, 0:0, samples per mains cycle = 38.42
0:0, 0:0, -1:0, 0:0, samples per mains cycle = 38.43
0:0, 0:0
Re: Example sketch not working: emonTxV3 continuous kwhtotals noeeprom.ino
If no power is being detected at any of the CTs, that data looks fine to me. No power (W) or energy (kWh) on any channel.
If you clip one of your CTs around either 'live' core of a mains lead through which current is flowing, the displayed data should then change ...